Tubing and Fittings and Piping
Pre-Assembled Hemostasis Valve with Sideport Tubing and 3-Way Stopcock
April 17, 2013 1:42 pm | Product Releases | CommentsQosina introduced three new Hemostasis Valves with sideport tubing connection to a 3-way stopcock. The hemostasis valve features an automatic pre-slit seal, which eliminates the need for manual rotation.
LISTED UNDER: Medical Grade Tubing
Hemostasis Valves
February 11, 2013 2:28 pm | Product Releases | CommentsQosina added of three 9 FR Hemostasis Valves (#80325, #80326, #80327) to its line of guide wire kit accessories. All three feature a clear polycarbonate body that allows for fluid visualization, and a silicone valve that creates a seal to prevent backflow.
Anti-Slip Boot
January 11, 2013 2:13 pm | Product Releases | CommentsQosina added an Anti-Slip Boot (#51599) to its line of stock components. The new Anti-Slip Boot helps prevent luer fittings from slipping apart, and works with most standard luer fittings. It is made from medical grade silicone and applicable for autoclave, gamma and EtO sterilizing.
Lab Tubing
September 4, 2012 9:42 am | Product Releases | CommentsThe new Cole-Parmer Non-DEHP Lab Tubing offers a versatile option for medical device assemblies, analytical instruments, food processing, and general laboratory uses. The tubing transfers liquids, gases, and inorganic chemicals found in lab, paint, pigment, and soap dispensing applications.
Custom Cut-To-Length Tubing
June 7, 2011 10:06 am | Product Releases | CommentsFor researchers, laboratory technicians, and plant workers who spend time cutting tubing, a better option is available. Cole-Parmer’s BioConnect Program now offers custom cut-to-length tubing.
Microbarb Low-carryover Connectors
February 18, 2011 6:47 am | Product Releases | CommentsDiba’s chemically inert Microbarb connectors provide a low-carryover connection between flexible pump tubing and semi-rigid fluoropolymer tubing.
Flow Regulator
November 1, 2010 7:01 am | Product Releases | CommentsThe precision IV flow regulator from Qosina (Part # 21293) has a ridged dial which facilitates accurate flow rate adjustment. The clearly marked blue flow indicators (5 to 250 ml/ hour) ensure reliable infusion rates.
Isolation Valves
June 23, 2010 7:44 am | Product Releases | CommentsBio-Chem Fluidics (BCF) offers its line of Bio-Chem Valve Solenoid Operated Isolation Valves for the handling of small flows of aggressive or high purity fluids.
Multi-way Fluidic Connections
June 17, 2010 5:55 am | Product Releases | CommentsDolomite has introduced the new Mitos In-line Connector System. This connector provides in-line sealing and highly accurate alignment between the tubes, enabling uninterrupted liquid flow.
Contamination-free Fluid Handling
May 4, 2010 6:02 am | Product Releases | CommentsCole-Parmer’s Masterflex peristaltic tubing pump systems are designed for contamination-free fluid handling processes. These fluid handling systems with sterilizable fluid paths are designed to meet the needs of the pharmaceutical and biomedical communities.
360 µm High Pressure Fittings
March 17, 2010 7:35 am | Product Releases | CommentsVICI Valco’s new 360 µm High Pressure Fitting design permits direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without having to use troublesome liners.
Sanitary Fittings with Pre-attached Gasket
March 17, 2010 7:11 am | Product Releases | CommentsSingle-use bioprocessing has brought major cost reductions to biopharmaceutical manufacturing. The new sanitary fittings (Part #s 51601 through 51609) from Qosina bring further labor and cost savings with the addition of a pre-attached platinum-cured silicone gasket.
Y Connector Check Valve
February 22, 2010 5:45 am | Product Releases | CommentsQOSINA’s part #80206 brings the dual functionality of both a Y connector and a check valve into one component. This solution features two 0.157 inch I.D. ports and a non-return valve on the female luer lock sidearm.
Stainless Steel, Over-braided PTFE Hose
January 16, 2008 10:19 am | Product Releases | CommentsAvailable in six variations, APFOS hose is constructed of a virgin PTFE core over-braided with series 300 stainless steel wire. The core provides non-restrictive flow and an inert surface to transport critical fluids. APFOS handles temperatures ranging from 㫎 C to 232 C.
Online Custom Tubing Set Configuration
December 17, 2007 7:27 am | Product Releases | CommentsThis online tool allows scientists to design integrated fluid transfer and bioprocess systems using NALGENE and NUNC brand products for handling high value products. It can be viewed at www.nnibioproduction.
