Advertisement
Safety Equipment

Glovebox Designed for High Level of Containment

February 11, 2014 2:29 pm | The Baker Company, Inc. | Product Releases | Comments

The Baker Co.’s IsoGARD series Class III gloveboxis designed for research involving agents assigned to BSL-3 and -4 facilities, or where a very high level of containment is required because of the nature of the protocol. The cabinets are designed to allow safe handling of hazardous microbiological agents or pharmaceutical potent compounds under contained conditions.

LISTED UNDER: Glove Boxes

PCR Workstations Provide Product Protection and Sterilization

April 12, 2013 10:16 am | Product Releases | Comments

The CaptairBio PCR Workstations from Erlab use a UV lamp, which allows the working environment to be decontaminated in order to prevent contamination of samples. The filtration of the sterile housing is controlled by a fan that draws in air from the laboratory and passes it through a HEPA H14 filter, which is more than 99.995% effective at trapping particles 0.1 microns and higher.

LISTED UNDER: Other Safety Equipment

Passive Needle Guard

April 11, 2013 11:42 am | Product Releases | Comments

BD Medical, a segment of BD (Becton, Dickinson and Company), announced the commercial launch of a new passive needle guard technology, BD UltraSafe PLUS. This product, in addition to offering needlestick safety, is enhanced with ergonomic features designed to facilitate comfort and support for healthcare providers and patients.

LISTED UNDER: Other Safety Equipment | Syringe Needles
Advertisement

System Designed for Safe Vacuum Aspiration of Liquids

March 19, 2013 3:14 pm | Product Releases | Comments

The VACUSAFE Laboratory Aspiration System from INTEGRA is designed to provide simple, reliable and safe aspiration of hazardous waste liquids in Microbiological and Biomedical Laboratories.

LISTED UNDER: Disposal Containers | Other Safety Equipment

Safety Enclosure Provides Controlled Laboratory Environment

February 14, 2013 1:46 pm | Product Releases | Comments

Available from Asynt—the Lab-Bubble is a piece of containment equipment that can be used to provide many different types of safety or controlled environments by using additional components to change the function of the enclosure.

Class II, Type A2 Biosafety Cabinets

February 4, 2011 7:00 am | Product Releases | Comments

NuAire announced the availability of CellGard ES (Energy Saver) models NU-475 and NU-477 Class II, Type A2 Biosafety Cabinets. Each cabinet is modeled after NuAire’s LabGard series of Biosafety Cabinets but features a 10 degree sloped sash like the CellGard ES NU-480.

Enclosure Ensures Clean Pipetting Environment for Liquid Handler

January 31, 2011 9:51 pm | Product Releases | Comments

Hamilton Robotics introduced a new enclosure for its MICROLAB NIMBUS line of compact automated liquid handlers. The enclosure can be equipped with an optional high efficiency particulate air (HEPA) filter, which delivers clean air to the pipetting work surface for protection of samples, enzymes, and reagents.

Homogenizer Safety Enclosure

September 10, 2010 7:45 am | Product Releases | Comments

The BIOBOX is a new locking containment unit from Next Advance. The BIOBOX is a protective box around the BULLET BLENDER homogenizer, which can homogenize tissue and cell culture for the isolation of a variety of analytes.

Advertisement

Ergonomic Anaerobic Chamber

August 24, 2010 6:55 am | Product Releases | Comments

Sheldon Manufacturing has announced the release of its new BacBASIC Anaerobic Chamber. The BacBASIC is ideal for environmental and incubation work in microbiology and cell biology applications.

Containment Solutions for Powder Milling

June 9, 2010 6:38 am | Product Releases | Comments

Flow Sciences offers a new design of an L1A Fitzmill Enclosure. The ¾” Polypropylene framed enclosure features acrylic sidewalls and sash to maximize transmission of natural light and mill-process viewing.

Containment Solutions for Powder Milling

May 25, 2010 5:57 am | Product Releases | Comments

Flow Sciences offers a new design of an L1A Fitzmill Enclosure. The ¾” Polypropylene framed enclosure features acrylic sidewalls and sash to maximize transmission of natural light and mill-process viewing.

Laser Safety Glasses

May 12, 2010 5:52 am | Product Releases | Comments

Vision USA offers Task-Vision Laser Safety Glasses in polycarbonate, glass, and thin dielectric filter glass that can accommodate laser safety applications with protection, visibility and comfort.

Biosafety Cabinets for Cell Research

April 13, 2010 5:16 am | Product Releases | Comments

The new Purifier Cell Logic Biosafety Cabinets from Labconco fit the specific needs of delicate cell research while sharing the same exclusive ECM motor technology features as the Purifier Logic.

Atmospheric Chamber for Cell Culture

October 23, 2009 12:53 pm | Product Releases | Comments

The HypOxystation from HypOxygen is an atmospheric chamber purpose built for cell culture research. It was specifically designed to create normoxic, hypoxic, and anoxic conditions within a controlled and sustainable workstation environment.

Spill Sensor

February 26, 2008 5:37 am | Product Releases | Comments

The OS250 system detects spills and leaks with as little as three drops of liquid. The system consists of a moisture sensing mat and control unit. The mat is made from a material specially developed for detecting liquid spills. It is connected to the control unit by a simple cable.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading