Advertisement
Lab Equipment

Iceless, Waterless Stirring Bath

June 25, 2015 4:03 pm | Product Releases | Comments

The ICE-STIR is a bench-top product that cools vessels below ambient temperature while maintaining. Aluminum Thermal Lab Beads conduct heat away from the sample while magnetic stir rods continuously stir the contents.

LISTED UNDER: Lab Equipment | Heating and Cooling Equipment | Stirrers

Fi-Streem Digital Vacuum Oven

May 18, 2015 2:12 pm | LabStrong Corporation | Products

LabStrong is an authorized distributor of the Fi-Streem Vacuum Oven. The Fi-Streem Vacuum Oven was previously manufactured by Sanyo Gallenkamp and branded as the Gallenkamp Vacuum Oven. The oven is suitable for a variety of laboratory applications such as heating and drying, temperature related experiments, curing, vacuum embedding and plating applications.

LISTED UNDER: Heating and Cooling Equipment

Cool Solutions Peltier Inline Cooler, Heater

May 14, 2015 3:57 pm | Automate Scientific, Inc. | Product Releases | Comments

Heat perfusion solutions from 20 to 50°C in 3 seconds, then cool them down to 2°C in just a few more seconds –all controlled by your electrophysiology software or our box. The Cool Solutions CS-1 is suitable for single channel electrophysiology (no detectable noise added), whole cell patch clamping, or fluorescent imaging of groups of cells.

LISTED UNDER: Lab Equipment | Heating and Cooling Equipment
Advertisement

OEM Wide Assortment of PEEK Tubing

May 6, 2015 3:36 pm | by VICI Valco | Product Releases | Comments

VICI Valco’s new assortment of PEEK Tubing is one of the largest offerings in the world and is available in a variety of natural PEEK, solid color coded, dual layer color coded, striped and dash-stripe coded. Dual Layer Color-Coded eliminates any concern that a critical sample stream could be contaminated by pigments used to color code the tubing.

LISTED UNDER: Chromatography | Accessories | Tubing

Diluting and Proportional Fluid Control with ±1% Precision

May 1, 2015 4:36 pm | Fluid Metering, Inc. | Product Releases | Comments

The STH and STQ Duplex metering pumps from Fluid Metering, Inc. are ideal for precision mixing, diluting, and proportional metering for OEM medical, analytical, and industrial instrumentation. FMI’s OEM Duplex Metering Pumps consist of two valveless pump heads direct coupled to a single variable stepper motor drive.

LISTED UNDER: Lab Equipment | Pumps | Metering Pumps

Wide Range of Volumetric Glassware from Poulten & Graf

May 1, 2015 3:47 pm | Product Releases | Comments

Poulten & Graf offer a wide range of volumetric glassware under the VOLAC and FORTUNA brands. All Volumetric Glassware is made according to ASTM, USP, and ISO standards. Certification is available, either as a batch or individually, with appropriate ring marks. Calibration of flasks and cylinders is "IN"; indicating that the liquid poured out equals the volume indicated.

LISTED UNDER: Lab Equipment | Apparatus and Consumables | Glassware

Safe Storage of Noxious and Odorous Chemicals

April 30, 2015 4:08 pm | Product Releases | Comments

The new Safestore Vented Chemical Storage Cabinets from Air Science are ideal for storage of noxious or odorous chemicals. These cabinets minimize health and environmental risks in handling chemical vapors and residues, VOCs and general laboratory functions. The Air Science Multiplex filtration system protects the safety of personnel during use, maintenance and decontamination.

LISTED UNDER: Lab Equipment | Biological Safety Cabinets

New Purair 5 Ductless Fume Hood

April 17, 2015 5:03 pm | Product Releases | Comments

The  new Purair 5 Ductless Fume Hoods from Air Science USA feature a high level of operator protection where routine work is being carried out. The units exceed OSHA, ANSI and all relevant international standards. The Ductless design eliminates installation costs and allows the unit to be positioned over a sink or benchtop apparatus.

LISTED UNDER: Basic Lab Equipment | Fume Hoods
Advertisement

New Aluminum Topped Programmable Hot Plate

April 17, 2015 4:43 pm | Product Releases | Comments

Torrey Pines Scientific Inc. announces its new EchoTherm Model HP61A Programmable Hot Plate with a 12” x 12” milled-flat cast aluminum heater top. Applications include wafer processing and annealing, polymer engineering, baking photo resists, wax and glue heating and bonding, micro fabrication and encapsulation, surface mount soldering, and heating any sample direct...

LISTED UNDER: Lab Equipment | Heating and Cooling Equipment

Customized Fume Hoods

April 17, 2015 4:32 pm | Product Releases | Comments

Flow Sciences Process Enclosures are designed and customized to protect the process equipment and the personnel. The EVP Series provides safety from chemical vapors generated during processes such as flash chromatography, evaporation from rotary evaporators, and other process equipment applications.

LISTED UNDER: Basic Lab Equipment | Fume Hoods

Next Generation LS Class High Pressure Piston Pumps

April 17, 2015 4:15 pm | Product Releases | Comments

Scientific Systems, Inc. (SSI) has recently launched their Next Generation Product Line, which includes seven new classes of pumps. Described here is the LS Class, consisting of reliable single-headed, positive displacement piston pumps with very low pulsation and high accuracy.

LISTED UNDER: Pumps | Piston Pumps

Microtube Shaking Incubator

April 9, 2015 11:20 am | Product Releases | Comments

Bioresearch equipment provider Labnet International launched a new addition to the company’s constant temperature equipment line with the release of the new AccuTherm Microtube Shaking Incubator.

LISTED UNDER: Incubator Shakers

Compact Incubator Shakers with Additional Operator Safety

April 7, 2015 10:46 am | Product Releases | Comments

The IKA shaker family has two new additions: KS 3000 i and KS 3000 ic incubator shakers.

LISTED UNDER: Incubator Shakers

Motum TS Spray System

March 24, 2015 4:14 pm | Product Releases | Comments

The new Motum TS Spray System provides a compact, easy-to-use benchtop device for spraying coatings onto substrates of any type. The system can be placed in a laboratory fume hood or provided with a custom enclosure. A standard heated/cooled base plate allows for temperature control of substrates between +4°C and 150°C.

LISTED UNDER: Hardware | Robotics | Other - Basic Lab Equipment

Eureka MH-180 Desiccator Cabinet

March 23, 2015 5:17 am | Eureka Dry Tech | Products

Eureka MH-180 Desiccator Cabinet has a capacity of 163 Liters. Controlled Humidity Range of 25%RH-55%RH. External Dimension measures 80*55.5*45.5 cm (W*H*D) / Internal Dimension: 76.4*46*40 cm (W*H*D) Standalone German Analog Hygrometer provides independent monitoring of relative humidity inside the cabinet. This product consumes 12 Watts and standard lock with two keys are included. This dry cabinet features a no-center bar design. Allowing easy storage and access for your large size or odd shaped items.

LISTED UNDER: Sample Storage and Retrieval Systems | Labware Handling Products | Other - Basic Lab Equipment

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading